VPN

Dear All,First of all, there are 2 PIXs with PPPoE setup on the outside interface, and the LAN-to-LAN vpn works well. The problem occurs when I tried to establish another tunnel between one of the 2 PIXs and a third PIX without PPPoE setup on the out...

Hi guys, i've strange problem.This is my topology :vpn client 1.1 ----- RAS 3Com ----- PIX 525 ------ CA win2kUsually the client uses authentication RSA signature and come up the vpn when the client asks the home page via http.So sometimes this syste...

we have 3 remote ipsec sessions to connect to our external router, l2tp, vpn client and gre, how do I make the crypto maps work, should there be one uber crypto map for all applications associated with the external interface, and if so would i apply ...

We have a Cisco VPN 3030 and are using the Cisco VPN Client 4.x. Current all users end up with the same phase 1 proposal when they connect, regardless of the settings we choose for their group properties. We create a specific named proposal and a s...

I have the following problem: Since I installed VPN Client 4.0 I can not anymore access PIX via PDM over IPSec with VPN Client.I have not changed the PIX configuration, but what I see in the new VPN client is that now route to PIX itself does not app...

I have installed vpn client 3.0.1 in windows 2000 proffesional pc and trying to make a secure connection to a cisco 3640 vpn enabled router IOs 12.2(8) .when i try to connect i get message"Failed to establish a secure connection to the security gate...

Hi group,Does anyone knows how can the vpn client be set to push http proxy server's ip address down to each client ? We're on version 3.6.3 (B).I had tried setting "NetworkProxy=" into vpnclient.ini but it doesn't seems to work when I connect to the...

I have PIX 515, and set up IPSec vpn for user with VPN software client 4.0 to access the corp network, I get user tunnel up, user get a ip address from 515 define pool, but I could not ping PIX inside IP address from this remote VPN client PC, Is thi...

I am looking into purchasing one of the new palm tungsten phones from Rogers. These use the Palm OS. Is there a vpn client for the Cisco router that works with the Palm OS?Thanks,Bob

HelloI've got a cisco Secure VPN Client1.1 trying to connect to a pix via IPSec. Basically this is an existing config which I'm trying to optimize. There are two internal networks on the inside of the pix. Is there any way to set up the VPN Client...

Hello,I'm trying to connect a Watchguard Firewall with a router Cisco 827 via ipsec.I'll call the network behind the firewall Network 1 and the network behind the router Network 2.After configuring both devices, network 1 and network 2 can access eac...

We are using ACS v3.1 on a Win2K machine. We don't have a problem with logging into the PIX by going through the ACS server using TACACS+. However, when the "Apply password change rule" is checked in ACS, PIX causes that user to expire. I've also te...

Currently i have LAN to LAN tunnel on a PIX515e, with OS version 6.22What is the best way to just restrict one of the tunnel, only outgoing traffic is allow, and drop all incoming traffic from remote site?if we take out sysopt permit-ipsec, it will b...

Hi,My scenario is that I have two VPN clients on the same subnet, without split tunneling, establishing a tunnel on the same DMZ interface of a PIX 525. The fact is that I manage to ping everywhere I want but I cannot ping the tunnel's IP address of ...

Hi!3030 is sold in non-redundant and redundand (2 SEPs) configurations.The question is: is it possible to move 2nd SEP from the bottom slot tothe top, so that both SEPs will work in parallel?Thanks,Oleg Tipisov,REDCENTER,Moscow