11-28-2012 11:44 AM - edited 02-21-2020 06:31 PM
we have three ASA 5540 with
Cisco Adaptive Security Appliance Software Version 8.4(5)
Device Manager Version 6.4(9)
this devices are only for remote conections (webvpn/ssl-web/anyconnect),
and we are having problems with connections anyconnects; are released every 15 seconds, the version anyconnect is 2.3.0254
is there a conflict of versions or a bug that could be picking up???
is there a compability matrix betwen Software Version of ASA and Anyconnect ????
11-28-2012 12:57 PM
Renato,
The AnyConnect client is now at least 3 or 4 versions ahead of the version your using. I would recommend upgrading to a later version. However, can yo be a bit more descriptive about your connection issues to see if we can work those out?
By making some drastic assumptions and shooting from the hip,we could be looking at mtu issues or a myriad of other faults.
Best Regards
Julian
Sent from Cisco Technical Support iPad App
11-29-2012 12:48 PM
hi Julian
Upgrade to version 2.5 (anyconnect) and perform connection test and do not present this problem,
the only thing is that the done in a time of low load, was the only one connected.
When testing at high traffic times I commented as I was
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide