04-30-2013 03:41 PM - edited 02-21-2020 06:51 PM
Hi Cisco Friends,
We have dns server(only Internal IP) inside our network, right now we have configured Remote Access VPN using Public IP and we connect it using the same Public IP. I need help to use FQDN instead using Public IP.
Can you please Provide the configuration for this.
Device : ASA 5520
Configuration Type : IPSec
---
Posted by WebUser Pushpendra Yadav from Cisco Support Community App
04-30-2013 05:54 PM
Hi Pushpendra,
Step 1:
http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/vpnrmote.html
Step 2:
your FQDN should be reachable from outside public network
eg: remotevpn.local.com
if this is your FQDN, then if you ping remotevpn.local.com it should resolve to the interface ip address to which the VPN terminates
i.e I t should resolve to 10.10.4.200 as per this example.
Step 3: PCF file configuration
Host: remotevpn.local.com
Group name: testgroup
Group password: 44kkaol59636jnfx
check the attached snippet
05-04-2013 08:56 PM
Hi Pushpendra,
This can be achieved by configuring the DDNS()dynamic dns) on the ASA
Here is the link that yo can go though
http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/basic_ddns.html
Hope this helps you.
Thanks
Raj
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide