05-15-2017 06:43 AM - edited 02-21-2020 09:17 PM
I have configured Remote Access VPN (PPTP) on CISCO2901. When i am connected to my office by Remote Access VPN (PPTP) then my local LAN is reachable.by this time my internet connectivity does not work.
I want to know that, Is their any command or configuration that i can reach both (Internet and LAN) by using Remote Access VPN (PPTP)
Thanks
05-15-2017 06:43 PM
Hi md__shamsuddoha,
You have 2 options:
-You can add the PPTP pool to the NAT so you get Internet from the VPN
-You can configure a Split tunnel on the client end:
http://www.cisco.com/c/en/us/support/docs/ip/point-to-point-tunneling-protocol-pptp/18761-pptp-faq.html
https://technet.microsoft.com/en-us/library/cc779919(WS.10).aspx#w2k3tr_vpn_how_dkma
Hope this info helps!!
Rate if helps you!
-JP-
05-15-2017 09:12 PM
I am added my PPTP pool to the NAT but its not working.
Please be conform me is it work or not.
Thanks in advance.
05-16-2017 06:41 PM
Hi md__shamsuddoha,
If you take a look to the links on my previous post you will find out this can work as long as you have it configured properly on the client or the Router depending of how you want to do it, if you need more help you can always upload a sanitized config and ill be happy to help you.
Hope this info helps!!
Rate if helps you!!
-JP-
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide