01-12-2015 11:59 AM - edited 02-21-2020 08:01 PM
Hi all,
In my case I already configured the
Must I create a user/pass
Thanks.
Solved! Go to Solution.
01-13-2015 07:19 AM
Hello,
I see what you mean!
That is not required for the LDAP integration.
You are going to do the authentication with LDAP not the LOCAL database so no need for that.
Remember to rate all of my answers
Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2-CCNP, JNCIS-SEC
For inmediate assistance hire us at http://i-networks.us
01-12-2015 06:17 PM
Hello,
Not sure if I am following exactly in your question...
Let's say we are talking about an ASA with LDAP integration for RA VPN authentication.
In that case you need to have a user and password account for the ASA to be able to bind itself to the LDAP Server.
This account that you are going to create for the ASA should be able to do a object query into the LDAP database plus be able to create objects.
Does it makes sense?
Regards,
Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2-CCNP, JNCIS-SEC
For inmediate assistance hire us at http://i-networks.us
01-13-2015 12:51 AM
Hello Julio,
https://supportforums.cisco.com/document/139241/remote-access-vpn-asa-authentication-using-ldap-server
And as you can see its adding a user/password, that is not the same with the
01-13-2015 07:19 AM
Hello,
I see what you mean!
That is not required for the LDAP integration.
You are going to do the authentication with LDAP not the LOCAL database so no need for that.
Remember to rate all of my answers
Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2-CCNP, JNCIS-SEC
For inmediate assistance hire us at http://i-networks.us
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide