08-08-2016 09:43 PM - edited 02-21-2020 08:55 PM
Hi,
I have some problem with one Remote IPSEC Tunnel.
Since a few days, when I want connect my remote IPSEC Tunnel with VPN Client CISCO, the software try to connect, but never ask me the user name and password.
I tried to restart Modem and Firewall.
I tried to create another Remote IPSEC Tunnel, but i have the same problem.
Have you any Idee?
Thanks.
08-09-2016 07:55 AM
Is it correct that this was working and now it is not? If so have any changes been made? Any upgrade to OS or patches applied? Do you have IP connectivity to the VPN address?
HTH
Rick
08-09-2016 08:08 AM
Yes, this was working and now it is not.
I made no update, modification, ...
I have configure one port forwarding for try one RDP access, it's work perfectly.
I have many VPN site-to-site configure and it's work.
08-09-2016 05:27 PM
Hi,
Without proper debugs it would be a tad difficult to tell what is causing this.
Please share the outputs for the debug cry
Use
Regards,
Aditya
Please rate helpful posts and mark correct answers.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide