01-29-2005 08:56 PM
Hi,
Does anyone know a goof remote power control hardware so that I can do a remote power reboot or power on/off over telnet or web interface?
Thank you.
Regards,
Ron
01-30-2005 12:16 AM
Hi,
You can use SNMP to force a device to reload.
Have a look here for the details
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_q_and_a_item09186a00800c263d.shtml#qa4
If you are going to deploy this method on your devices i would recommend also using access-lists within your SNMP config so that your devices will only accept SNMP read/writes from specific hosts.
Thanks
Paddy
01-30-2005 07:10 AM
If you want an enterprise class solution then take a look at this.
You even do environmental monitoring and a few other cool things.
Hope this helps.
Please remember to rate all replies
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide