01-26-2022 01:32 PM
Hi Everybody,
I have a need to create a tunnel from an office with a dynamic IP to our main data center with static IPs. Looking at the directions below, it says "The information in this document is based on Cisco ASA (5510 and 5520) Firewall Software Release 9.x and later."
I am looking to do this preferably using two ASA 5505s. Is it possible with 5505s? I already have experience creating static IPsec tunnels between 5505s, just not with one end having a dynamic IP.
Thanks in advance for any advice!
Jesse
Solved! Go to Solution.
01-26-2022 01:45 PM
@Jesserony yes it should work on ASA 5505.
Needless to say those devices are EOL and ideally you'd replace with newer devices that support the latest strongest ipsec algorithms.
01-26-2022 01:45 PM
@Jesserony yes it should work on ASA 5505.
Needless to say those devices are EOL and ideally you'd replace with newer devices that support the latest strongest ipsec algorithms.
02-02-2022 06:11 AM
Thank you Rob! Yes, ideally we will be using newer models, just wanted to ensure that the 5505 is an option. Thanks for your help!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide