07-15-2013 07:40 AM
2 sites, A and B wanting to create a VPN Tunnel between
Site A has static IP on Broadband Router with an RV016, static translations and port forwarding will all be done at this side.
Site B has dynamic IP on Broadband Router with an RV042G. Site B's broadband connection isn't actually ours, so would rather not tinker with Router settings, ie Dynamic DNS and port forwarding.
Is this possible? the Site B RV042G should be bringing up the connection to the Site A RV016, but it appears not to do.
For reference, the RV042G has connected to the RV016, but only with static IP's at both ends.
07-30-2013 07:42 PM
Hello,
I believe that any VPN connections would involve configuring a VPN or at least VPN passthrough on both routers. I don't think that you can setup a VPN without adjusting Site B's router.
Alex
07-31-2013 12:55 AM
We have managed to resolve this issue. We set it from Dynamic IP to Dynamic IP and Email address.
If you want to get in touch please email s.jackson@bradfordcollege.ac.uk
thanks
Simon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide