Setting Up remote user vpn with AnyConnect on Cisco ISR4331-SEC/K9

[2D-Technology Services]

Hi Community Members.,

I am not certain what license that would be needed to achieve  SSL and Anyconnect  vpn for remote workers using ISR4331-SEC/K9 or any other higher model..

I would need your advice on the Hardware and requisite licenses to be procured for this purpose.

I addition I would also need the steps to achieve this Configuration

Thanks.

[Rob Ingram · Accepted solution]

@2D-Technology Services you will need Secure Client (AnyConnect) VPN licenses.

The reference guide to configure SSL-VPN does not state that it does or does not work on the ISR-4331, but it does state it works on the 4431 models or higher.

https://www.cisco.com/c/en/us/support/docs/security/ios-ssl-vpn/220267-configure-anyconnect-ssl-vpn-for-isr4k-w.html

IMO, you'd probably be better using an FTD or even ASA for SSL-VPN remote access, the support and configuration is much simplier.