Site to Site VPN - NAT

[Oscar Castillo]

Hello all,

I would like to have some guidance in regard NAT over Site-to-Site VPN.

Client will only allow traffic from the specific NAT'd IPs (10.x.x.x)

The traffic that must be allowed across the VPN:

I have internal network as 192.168.1.0 / 255.255.255.0 - all that client traffic must be PAT’d to 10.74.25.12

All client traffic requires access to the following bank servers.  198.x.x.225 and 10.15.4.9

Internal workstation ip address: 192.168.1.47 NAT’d to 10.74.25.2 (STATIC)

ASA 5505 - 9.1 

Thanks in advance,

O's

[Poonam Garg]

It will be easy to understand your scenario if you send the relevant configuration on your ASA. Are you talking about remote access ipsec VPN or its a Site to Site VPN ?