10-19-2016 04:28 AM
Hi Guys,
Need advice on Cisco ASA 5585-S60 site to site IPSEC VPN with 200 Peers , looking for the best practice design.
Static or Dynamic Crytpo map - which on would be best , FYI authentication is Certificate based with IKEv2 policy.
Any suggestion or url help is appreciated ,this one is my 1st VPN call looking for suggestion.
Thanks
JK
10-19-2016 08:01 PM
Hi jikuma006,
You can check the following configuration guides:
http://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike-protocols/117337-config-asa-router-00.html
http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/118652-configure-asa-00.html
http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/113597-ptn-113597.html#config
Hope this info helps!!
Rate if helps you!!
-JP-
10-20-2016 05:39 PM
Thanks alot JP for sharing link.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide