07-29-2007 11:30 AM - edited 02-21-2020 03:11 PM
I am looking for some information on how to configure a site-to-site vpn connection using the pix 515 and the 1841 router. I have a remote site that I would like to connect to the corporate office via DSL modem. If anyone could give some assistance this would be very helpful.
07-29-2007 11:34 AM
Hi
This should help you.
Cheers
Durga Prasad
07-30-2007 05:14 AM
Thanks; I need to give a little more information. The 1841 router will be located at the remote site with the DSL modem and the PIX is located at the corporate office. I am looking for some information on configuring the 1841 router for the remote site and configuring the PIX515 to accept the connection from the remote site.
07-30-2007 05:22 AM
Hi,
does your remote 1841 have a static IP or dymanic PPPoE type IP.
if it is static IP the document I have sent you has the detailed steps in that. You can always some back for more help.
Implementing site to site VPN when the remote site is having a dynamic IP is also possible but the security would be weaker as it would dependent only on the pre-shared key.
try to convert your remote site to a DSL with static IP.
HTH
durga prasad
07-30-2007 07:10 AM
Hi,
The remote site will have a static IP on the router. I haven't received the document yet.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide