10-11-2012 07:24 PM
Dear
I would like know is that possible to connect two 5505 ASA in site to site VPN with 1 site using ADSL pppoe connection?
Site A (static IP)
Site B (ADSL pppoe DHCP)
Site A <<< site to site VPN >>> Site B
Best regards
Alan.
Solved! Go to Solution.
10-12-2012 05:12 AM
Site B configuration should be the same as all the other side that peers with static end.
The configuration that differs would be on Site A as it will be accepting VPN from a dynamic peer.
Unfortunately i don't have any sample config to show you on ASDM.
10-11-2012 07:44 PM
Surely possible, here is the configuration guide:
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00805733df.shtml
10-11-2012 07:55 PM
Dear Jennifer
Can you provide me ASDM configuration page as well. It is because my site A already ikev2 site to site VPN to few offices ASA.
Regards
Alan
10-12-2012 05:12 AM
Site B configuration should be the same as all the other side that peers with static end.
The configuration that differs would be on Site A as it will be accepting VPN from a dynamic peer.
Unfortunately i don't have any sample config to show you on ASDM.
11-19-2012 01:26 AM
Dear
I am configuration 2 ASA for static and dynamic IP site to site connection with IKEV2. Other then this link:
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00805733df.shtml
Could you provide any related page for site to site tunnel VPN with staic and dynamic IKEV2?
11-21-2012 02:51 AM
Here is the sample configuration for the static side for IKEv2:
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080bb8500.shtml
Here is the dynamic crypto map configuration:
http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/vpn_remote_access.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide