03-17-2009 08:10 AM
Hi,
Can we setup site to site vpn using Broadband internet connection. we get different Public address on our Nortel every day . with this situation can anyway we can setup a site to site vpn with other side cisco PIX.
If possible what is the needed configuration needed in both side.
Any response is highly appreciated.
Thanks
03-24-2009 08:16 AM
hi,
Yes, for as long as the pix has a static wan ip address, you can setup vpn site to site even if the other peer has a dynamic ip.
You just need to configure the pix firewall to accept dynamic vpn connections.
check the ff links:
>> if you are using pix 6.3 and lower
>> if you are using pix ver 7
https://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00805733df.shtml
Hope this helps.
03-26-2009 08:45 AM
I wish they had bolded the necessary configuration changes in the version 7 document. The comments and boldfaced type in the ver 6.3 instructions was easy to see.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide