SNMP Getting status "standby mode"

[koshelnikov]

Hello everyone!

I have a problem with getting list of port with status standby mode using SNMP. We have a port which has standby mode status. I could not find OID to fetch this additional status.

Device: Cisco 6513

Guys, please, help!

Best regards,

Sergey.

[Claudio Gonzalez Sequeira]

Hi Sergey, 

It seems that the CISCO-STACK-MIB will display that information.

please try to the following OIDs :

sysConfigSupervisorModuleNo

1.3.6.1.4.1.9.5.1.1.52

Description "Indicates the supervisor module (active or

standby, if applicable) that the MIB objects

sysConfigRegister, sysBootVariable,

sysStartupConfigSource, and

sysStartupConfigSourceFile are specified for.

This MIB object is only supported by the

supervisor modules with the flash file system

feature support. The default value for this MIB

object is set to the active supervisor module

number."

or 

sysStandbyPortEnable

1.3.6.1.4.1.9.5.1.1.53

Indicates whether the standby port feature is
enabled or not. If this object is set to
enabled(1), the uplink ports on the standby
supervisor module are activated; otherwise, the
uplink ports on the standby supervisor remain
inactive."

Hope it helps!

Claudio Gonzalez