Spoke to Spoke VPN with NAT

[bashbechtle]

The question how to configure spoke-to-spoke VPN traffic on the ASA with Dynamic NAT.

as Example:

SiteA: 192.168.20.0/24

SiteB: 192.168.30.0/24

Hub:   192.168.10.0/24

Site A should reach the hub with the same source IP (192.168.20.0/24),

but should reach Site B with the IP 10.0.10.1 (D-NAT)

[balaji.bandi]

Look at the below guide : hope this what you looking for ?

https://community.cisco.com/t5/security-documents/cisco-asa-vpn-spoke-to-spoke-communication-via-the-hub/ta-p/3154011