Hi Team,
ISE posture is working fine for windows 7,8,10 desktops.
ISE posture is not working in Thinclients machine running with Windows Embedded 7 OS . Anyconnect Posture Module System scan says “Operating system is not supported with Server”.
ISE 2.0 Network Component Guide says that
https://www.cisco.com/c/en/us/td/docs/security/ise/2-0/compatibility/ise_sdt.html
Cisco ISE does not support the Windows Embedded operating systems available from Microsoft.
However 2.3 does not list that.
https://www.cisco.com/c/en/us/td/docs/security/ise/2-3/compatibility/ise_sdt.html#pgfId-123698
Would like to verify if its supported or not.
Does this limitation applies to Any-connect NAM Module also or only with Any-connect ISE Posture Module?
If its not supported is there any alternative to bring Windows Embedded 7 OS into network?
Thanks
Amit
