Trying to understand the behavior when two different users trying to authenticate from the same supplicant with any-connect, the 1st user log-off?

[glavi]

setup:

1st user authentication against ISE & auth pass

Windows screen is lockout

2nd user trying to authenticate on the same supplicant.

[gbekmezi-DD · Accepted solution]

Is the supplicant using username/password authentication or certificates? It should work fine with logging out and logging in if you’re using username/password authentication or with user certificates managed by AD. I don’t think it’s supported (or didn’t used to be) with fast user switching though. Also, you’ll probably have problems if you try to use a BYOD flow.

George