07-17-2012 03:29 AM - edited 02-21-2020 06:12 PM
Hi,
We have two sites, Site-A with a ASA 5520 (Remote Access IPSEC VPN server) at one end and a new ASA 5515-X at Site-B. Users at Site-B are unable to establish a VPN connection to Site-A via Cisco VPN client from behind the new ASA 5515-X. They see the following error:
"Secure VPN Connection terminated locally by the client.
Reason 412: The remote peer is no longer responding.
They are able to access the same from home or elsewhere so I believe there is nothing wrong with Site-A ASA vpn config which we have been using for a while now. The new 5515-X (version 8.6) has a very basic config with all outbound traffic allowed. I'm pasting the config below. Do I need to enable/allow anything for it to work?
CISCOASA# sh run
: Saved
:
ASA Version 8.4(3)
!
hostname CISCOASA
enable password xxxxxxxxxxxx encrypted
passwd xxxxxxxxxxxxxx encrypted
names
!
interface Ethernet0/0
nameif outside
security-level 0
ip address x.x.x.x 255.255.255.248
!
interface Ethernet0/1
nameif backup
security-level 0
ip address 172.16.16.11 255.255.255.0
!
interface Ethernet0/2
shutdownno nameif!
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
shutdown
nameif management
security-level 100
no ip address
management-only
!
ftp mode passive
dns server-group abc
object network obj-172.16.16.0
subnet 172.16.16.0 255.255.255.0
object network obj-172.16.17.0
subnet 172.16.17.0 255.255.255.0
object network obj-172.16.18.0
subnet 172.16.18.0 255.255.255.0
object network obj-172.16.19.0
subnet 172.16.19.0 255.255.255.0
access-list 101 extended permit icmp any any
pager lines 24
logging asdm informational
mtu management 1500
mtu outside 1500
mtu backup 1500
mtu inside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
!
object network obj-172.16.16.0
nat (inside,outside) dynamic interface
object network obj-172.16.17.0
nat (inside,outside) dynamic interface
object network obj-172.16.18.0
nat (inside,outside) dynamic interface
object network obj-172.16.19.0
nat (inside,outside) dynamic interface
access-group 101 in interface outside
route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
route inside 172.16.17.0 255.255.255.0 172.16.16.1 1
route inside 172.16.18.0 255.255.255.0 172.16.16.1 1
route inside 172.16.19.0 255.255.255.0 172.16.16.1 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
aaa authentication http console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 0.0.0.0 0.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
!
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 inside
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username test password xxxxxxxxxxxx encrypted
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
!
service-policy global_policy global
prompt hostname context
call-home reporting anonymous prompt 2
Cryptochecksum:fb76bae794475f06d31c2c7ba32ca49a
: end
07-20-2012 11:12 AM
Thank you Karthikeyan. unfortunately it doesn't work out. I have 3 Policy maps, here:
------------------
!
class-map vpn-udp-class
match access-list vpn-udp-acl
class-map inspection_default
match default-inspection-traffic
!
!
policy-map vpn-udp-policy
class vpn-udp-class
inspect ipsec-pass-thru
policy-map type inspect dns migrated_dns_map_1
parameters
message-length maximum 768
policy-map global_policy
class inspection_default
inspect dns migrated_dns_map_1
inspect ftp
inspect h323 h225
inspect h323 ras
inspect http
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
inspect pptp
inspect ipsec-pass-thru
!
service-policy global_policy global
service-policy vpn-udp-policy interface outside
********** I still could not use fixup protocol with ip-sec-pass-thru**** here:
pix535# conf t
pix535(config)# fixup protocol ipsec-pass-thru
^
ERROR: % Invalid input detected at '^' marker.
pix535(config)# fixup protocol ?
configure mode commands/options:
ctiqbe
dns
ftp
h323
http
icmp
ils
mgcp
mmp
netbios
pptp
rsh
rtsp
sip
skinny
smtp
snmp
sqlnet
sunrpc
sunrpc_udp
tftp
waas
xdmcp
******* I know this is a touchy issue and it has been bothering me for long time****
****manually pickup port instead of auto ports not helping
Thank you very much for spending your valuable time helping us out
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide