05-06-2003 12:31 PM - edited 02-21-2020 12:31 PM
Hello everyone,
In the company I work for we have two Cisco VPN 3000 Concentrators. They're running the same code level 3.6.7 and have the exact same configuration. I confirmed this by logging on to both boxes and checked every single option one by one. They're identical; however, I cannot ping one of them. I have also checked all my routing tables on the router, PIX firewall, etc. They are OK. Finally, I cannot even ping the "default gateway" from the Concentrator.
Any ideas would be helpful.
Thank you,
Carlos, CCNA
05-06-2003 08:27 PM
Do you have the ICMP In/Out rules in the Public filter, assuming you're trying to ping the public interface address? Check under Config - Policy Mgmt - Traffic Mgmt - Filters, select the Public filter and then Assign Rules to Filter.
05-07-2003 08:26 AM
Hi there,
Thank you. That was it :-)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide