04-09-2009 03:12 AM
Dear All,
I have one Cisco Router 2851 with following cards and features:
Cisco 2851-V/K9 - 2851 Voice Bundle
VWIC2-2MFT-T1/E1 - 2-Port 2nd Gen Multiflex Trunk Voice/WAN Int. Card - T1/E1
S28NSPSK9 - 12403 - IOS
PWR-2821-51-AC - 1 No
Router-SDM-CD - 1 No
PVDM2-48 - 1 No
MEM2800-256D-INC - 1 No
MEM2800-64-CF-INC - 1 No
ACS-2821-51-STAN - 1 No
Attaching Config details along with this.
Appreciate, if someone help me on this.
Regards,
Suresh
04-09-2009 03:28 AM
What is that you want to do ?
04-09-2009 09:21 PM
Hi,
I want to use this Router in replace to Patton device as RAS using E1 line for to access resources within that network dialing from the remote places.
Regards,
Suresh
04-10-2009 12:50 AM
You need a digital modems card for that, PVDM2-xxDM, where xx = 12, 24 or 36.
You will also need one of the following interface cards:
NM-1CE1T1-PRI
NM-2CE1T1-PRI
HWIC-1CE1T1-PRI
HWIC-2CE1T1-PRI
The VWIC that you have is not supported with the Digital Modems.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide