01-20-2005 10:28 AM - edited 02-21-2020 01:33 PM
After upgrading my VPN3030s to 4.1.7D the MovianVPN client on PocketPCs are not connecting. I am getting the following error in the VPN logs:
Invalid source proxy address: 0.0.0.0! Check private address on remote client.
QM FSM error (P2 struct &0x61de554, mess id 0x7ebef4bd)!
The client has an address and can be pinged.
This started after upgrading from 4.1 to 4.1.7D, any ideas??
Thanks!
Marcelo
01-28-2005 06:51 AM
If I remember correctly, the Movian VPN client is no longer supported. I'm afraid I don't remember the exact version. A search on cisco.com should get you that information.
03-23-2005 08:01 AM
This problem also occurs if you use the 4.7 software.
Worldnet21 is about to release AnthaVPN (similar to the MovianVPN client) I have tried a BETA version of this and it also has this Invalid proxy source problem. I have informed Worldnet of this issue, so hopefully they can work something out with Cisco and overcome this problem.
In the meantime I suggest downgrading your firmware if you require PPC VPN access.
Regards,
Derek
03-23-2005 11:55 AM
I downgraded a while ago to 4.1.7c, and now everything its working again. 4.1.7D rev will not work with the MovianVPN client.
04-26-2005 06:15 AM
I am getting this on an XP client running 4.0.2 (B), the 3030 is running 4.1.7.D. I don't get the error until the client tries to rekey the session. The initial connection works.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide