VPN 3030 - MovianVPN error

[mlew]

After upgrading my VPN3030s to 4.1.7D the MovianVPN client on PocketPCs are not connecting. I am getting the following error in the VPN logs:

Invalid source proxy address: 0.0.0.0! Check private address on remote client.

QM FSM error (P2 struct &0x61de554, mess id 0x7ebef4bd)!

The client has an address and can be pinged.

This started after upgrading from 4.1 to 4.1.7D, any ideas??

Thanks!

Marcelo

mlew@du.edu

[drolemc]

If I remember correctly, the Movian VPN client is no longer supported. I'm afraid I don't remember the exact version. A search on cisco.com should get you that information.

[derek.dodds]

This problem also occurs if you use the 4.7 software.

Worldnet21 is about to release AnthaVPN (similar to the MovianVPN client) I have tried a BETA version of this and it also has this Invalid proxy source problem. I have informed Worldnet of this issue, so hopefully they can work something out with Cisco and overcome this problem.

In the meantime I suggest downgrading your firmware if you require PPC VPN access.

Regards,

Derek

[mlew]

I downgraded a while ago to 4.1.7c, and now everything its working again. 4.1.7D rev will not work with the MovianVPN client.

[dlac455]

I am getting this on an XP client running 4.0.2 (B), the 3030 is running 4.1.7.D. I don't get the error until the client tries to rekey the session. The initial connection works.