VPN AnyConnect on ASA behind Internet Router

[asheemy]

I have scenario as below and need help please

Core Switch 10.10.1.1/30 ---------->(10.10.1.2/30 Inside Interface ) ASA (10.10.2.2/30 outside interface) -------> (10.10.2.1/30 LAN ) INT Router (30.30.30.30/30) public.

i configured the VPN but it needs more configuration to be done in router and the VPN should be public ip address so users from outside can access.

[Marius Gunnerud]

You need to NAT the public IP to the ASA outside interface IP.  If you do not have a dedicated public IP for this, then you need to NAT port 443 to the ASA outside interface IP.

--

Please remember to select a correct answer and rate helpful posts

[asheemy]

I have to nat the public ip which is located in Internet router to outside interface and that nat will configure on Internet router.

Right ???

[Marius Gunnerud · Accepted solution]

Correct.

--

Please remember to select a correct answer and rate helpful posts