VPN between ASA and SecuirePoint Black Dwarf

[AlekseyAndrosov]

Hi,

I am facing a challenge of configuring an VPN between SecuirePoint Black Dwarf VPN Router and ASA5510.

Black Dwarf's public IP is dynamic. Behind it there's a small network, which needs access to HQ through this VPN.

Will it work ? Or does ASA only support Cisco ISRs and other ASAs as a peer ?

Please suggest.

[Abaji Rawool]

Hi,

It should work from any peer as long as it supports the dynamic peer capabilities. 

For Asa side example refer :http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/112075-dynamic-ipsec-asa-router-ccp.html#t1-ciscoasa

HTH

Abaji.

[AlekseyAndrosov]

Abaji Rawool, how can I tell if the device "supports the dynamic peer capabilities" ?

For this "Black Dwarf" device, the manual pdf mentions Site-to-Site VPN as an option, and you can choose Outside Interface as the source, so no exact IP address is mentioned in the configuration. Is there anything else that I must look for ?

[Abaji Rawool]

This router should be able to define static peer and interesting traffic for VPN. Also it should be able to define phase 1 and phase 2 proposals supported by ASA.

HTH

Abaji.