02-25-2002 10:05 AM - edited 02-21-2020 11:37 AM
I've experiencing problems setting up a VPN (IPsec based.)
Hardware: two cisco1751 (isdn)
IOS version 12.1(3)XT2
Configuration: IPsec (auth & confidentiality), isakmp (preshared key method)
The system works perfectly if not using IPsec.
The problem seems to be related to the ike-isakmp phase.
The debug shows (among a lot of lines...) the next message:
1w0d: ISAKMP (0:4): sending packet to 192.168.20.2 (R) QM_IDLE
1w0d: ISAKMP (0:4): deleting node -1586022159 error FALSE reason ""
I can't find out where the problemis, maybe someone out there can give me a hand...
Thanks in Advance!
02-25-2002 06:40 PM
The debugs you've quoted did not capture what could be causing the issue.
Some sample config might help you out on:
http://www.cisco.com/warp/customer/707/overload_private.shtml
The whole debugs and config is needed to get you a clue. Maybe be best to be taken as a case with TAC.
02-25-2002 06:42 PM
type "debug crypto is" at the prompt and see what the output gives you.
Jerry
02-27-2002 10:59 AM
I'd already did it... first of starting this conversation. In fact the two lines I wrote were part of the execution of this command.
Anyway, thanks for your attention!
Now, I've solved my problem.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide