07-25-2012 11:52 PM
hello
Please tell me whether you can configure the VPN channel ipsec transform-set mode transport. How do I do?
Thank you.
07-26-2012 12:05 AM
In detail
The main platform costs cisco asa 5500 equipment, cisco asa 5500 branch. It is necessary to adjust vpn tunnel for work in the ipsec transform-set mode transport mode. In a mode by default everything works, the traffic goes, as soon as I transfer to the mode transport mode, the traffic ceases to go, though the channel works.
Excuse for my English.
07-26-2012 05:34 AM
Hi Lev,
May I know the reason to use a transform-set in transport mode?
Please check this out:
http://www.ietf.org/proceedings/52/slides/ips-1/tsld005.htm
We usually use tunnel mode for Cisco VPN clients and always transport mode for Microsoft clients (L2TP/IPsec).
Let me know.
Please rate this post if you find it helpful.
07-26-2012 07:23 PM
Hi Javier
We have a platform between the main and the branch has two independent channels. The task of balancing set of traffic delivered to him, to both channels simultaneously and worked at the exit of one of them, all traffic is switched to the working channel.
See the picture.
Thank you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide