VPN Cisco AnyConnect

[Fabiano Salgado]

Good morning, my internet connection drops the moment I connect to the vpn (Cisco AnyConnect)
Do you have any configuration to do, outside of the standard installation?
Thank you very much in advance.

[Rob Ingram]

Hi.

You will need the command "same-security-traffic permit intra-interface" to allow the RAVPN user traffic to hairpin and be routed back out the same interface it entered the ASA on. You will also need nat rule with the source as outside interface. E.g

object network RAVPN_USERS
 subnet 192.168.10.0 255.255.255.0
 nat (outside,outside) dynamic interface

 HTH

[Fabiano Salgado]

Thanks for the answer, the environment is standard installation on a computer, without manual configuration on my part, I just installed and connected it.
It may be something simpler, but I really have no idea.
Thanks for the collaboration.