vpn client and router routing issues

[pamirian76]

hi,

so my vpn client connects to the router and gets an ip , 192.168.6.X

on the network I have 192.168.1.x, 5.x and 10.x but I can only access the 6.x stuff from the vpn client.

when I do a route print on windows I can see that the 192.168.1.0, 5.0 and 10.0 routes are not there, I only have the 6.0 so that's why.

now I'm wondering if there is a way to configure my router so that when the vpn client connects it will populate in windows the 192.168.1.0, 5.0 and 10.0 as well?

thanks.

[srue]

Do you have split tunnelling enabled?

Can you post the (sanitized) config for the vpn settings, including related ACL's and nat statements.

[pamirian76]

hi.

so what I want to do, is that when I connect to the router using vpn client and getting the ip address of 192.168.6.X, I want to be able to go everywhere I want inside the network 192.168.X.X

I want access to 192.168.1.0, 5.0 and 10.0

any suggestions, pointers, anything?

thank you.