09-04-2014 10:36 AM
I'm currently using Cisco System VPN Client Version 5.0.07.0440 on Windows 8 x64.
I'm able to connect to my work network but I cannot access to the servers and I also cannot reach hosts using the PING. Maybe it's a routing problem of my personal pc? As you can see in the attached image that the traffic (Bytes in and Bytes out) is always 0.
route print -4
===========================================================================
Interface List
76...b8 76 3f 3b 2b 97 ......Microsoft Wi-Fi Direct Virtual Adapter #4
75...a4 5d 36 6b 54 c6 ......Realtek PCIe FE Family Controller
74...b8 76 3f 3b 2b 97 ......Realtek RTL8188EE 802.11bgn Wi-Fi Adapter
100...00 05 9a 3c 78 00 ......Cisco Systems VPN Adapter for 64-bit Windows
42...54 f2 db 84 c9 2b ......Check Point Virtual Network Adapter For SSL Network Extender
1...........................Software Loopback Interface 1
11...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter
24...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
33...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #9
===========================================================================
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.11.1 192.168.11.114 30
89.96.132.54 255.255.255.255 192.168.11.1 192.168.11.114 105
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
192.168.11.0 255.255.255.0 On-link 192.168.11.114 286
192.168.11.1 255.255.255.255 On-link 192.168.11.114 105
192.168.11.114 255.255.255.255 On-link 192.168.11.114 286
192.168.11.255 255.255.255.255 On-link 192.168.11.114 286
192.168.79.0 255.255.255.0 192.168.90.1 192.168.90.52 100
192.168.90.0 255.255.255.0 On-link 192.168.90.52 281
192.168.90.52 255.255.255.255 On-link 192.168.90.52 281
192.168.90.255 255.255.255.255 On-link 192.168.90.52 281
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 192.168.11.114 286
224.0.0.0 240.0.0.0 On-link 192.168.90.52 281
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 192.168.11.114 286
255.255.255.255 255.255.255.255 On-link 192.168.90.52 281
===========================================================================
Persistent Routes:
None
ipconfig
Windows IP Configuration
Wireless LAN adapter Local Area Connection* 9:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Ethernet adapter Ethernet:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Wireless LAN adapter Wi-Fi:
Connection-specific DNS Suffix . : local
Link-local IPv6 Address . . . . . : fe80::ad0c:6241:f8d4:ef01%74
IPv4 Address. . . . . . . . . . . : 192.168.11.114
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.11.1
Ethernet adapter Cisco VPN:
Connection-specific DNS Suffix . : ***.it
Link-local IPv6 Address . . . . . : fe80::c916:b9aa:9fd6:ea5a%100
IPv4 Address. . . . . . . . . . . : 192.168.90.53
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter isatap.***.it:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : ***.it
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : 2001:0:9d38:6ab8:89c:773:ad96:5848
Link-local IPv6 Address . . . . . : fe80::89c:773:ad96:5848%24
Default Gateway . . . . . . . . . : ::
Tunnel adapter isatap.local:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
09-06-2014 03:40 AM
The configuration should be the same. "albertom" and "help" are both my account used in my two personal computers. "albertom" account is configured in the BAD pc, with that pc I tryed also the account "help" but it still doesn't work. Instead the account "albertom" with the GOOD pc perfectly works.
This is the reason because I think the problem is in come configuration of the BAD pc, what can I do? checking routing table, checking the network adapter?
09-06-2014 04:10 AM
as per my knowledge there will be issues in acl and routing other then that..
go to system ->services>cisco vpn> stop and then again start try this
which version of asa is running on asa?
09-08-2014 01:32 AM
I rebooted the pc many times with no result.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide