VPN client connection to network *Help*

[fotismark]

Hi team...I need help to the below.

I set up a vpn client to my PC and went and configured a VPN to the router.

I have the below logs all the time

*Nov 24 09:10:52.385: ISAKMP:(1018):Sending an IKE IPv4 Packet.
*Nov 24 09:10:52.385: ISAKMP:(1018):purging node -1127024866
*Nov 24 09:10:52.385: ISAKMP:(1018):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
*Nov 24 09:10:52.385: ISAKMP:(1018):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
          
*Nov 24 09:11:01.825: ISAKMP:(1018):purging node -713363100
*Nov 24 09:11:02.533: ISAKMP (0:1018): received packet from "IP" dport 4500 sport 55358 Global (R) QM_IDLE      
*Nov 24 09:11:02.533: ISAKMP: set new node 1685467150 to QM_IDLE     

IPv4 Crypto ISAKMP SA
dst             src             state          conn-id slot status
IP              IP               QM_IDLE           1018    0 ACTIVE EZVPN_ISAKMP_PROFILE

What am I doing wrong?

Also, the vpn client connects with username and password and there are like 95 Encrypted packets but 0 decrypted shown at the Statistics.

Anyone please?

[fotismark]

Also....

     10.0.0.0/32 is subnetted, 1 subnets
S       10.10.10.15 (IP Given to me my pool)  [1/0] via ***My Public IP***
C    192.168.1.0/24 is directly connected, GigabitEthernet0/1 (Local Lan)
     ******/30 is subnetted, 1 subnets
C       Public IP is directly connected, GigabitEthernet0/0
S*   0.0.0.0/0 [1/0] via ***Public IP***
S    192.168.0.0/16 [1/0] via 192.168.1.238 (Default GW for Vlan)
ydrogeiosanal#ping 10.10.10.15

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.10.15, timeout is 2 seconds:
.....