02-23-2009 10:42 PM
Hi, I have asa 5505 at one side and I am connecting thru cisco vpn client.
fine I got connected ok and getting ip from dhcp(asa) fine, but unable to ping or access any services from remote lan.
02-24-2009 08:00 AM
Are you using split-tunneling or non-split? Is your VPN client receiving the appropriate routes? Are you using the 'sysopt connection permit-vpn' command on the ASA?
02-24-2009 09:59 PM
02-25-2009 05:56 AM
Is 9.2 the inside interface of the firewall?
02-25-2009 10:13 PM
yes
02-26-2009 04:56 AM
Do you have 'management-access inside' in your config? If not, I would try adding this in global config mode and re-test the ASDM connection through the VPN tunnel.
02-27-2009 01:25 AM
Hi,
well issue is not whether I am able to access ASDM or not. I was accessing just to confirm as to end to end connectivity is working or not.
02-27-2009 05:36 AM
Make sure the following is set up correctly:
1) NAT exemption
2) Internal devices routing to the VPN Client pool, through the ASA, if ASA is not the default gateway
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide