I'm getting 413 user can't authenticate error.
The lookup tool says this:Either the user entered wrong user authentication information, or the client was not able to launch the XAuth (user authentication) process.
My client logs says this:
25 00:03:28.875 03/16/05 Sev=Info/4 CM/0x63100015
Launch xAuth application
26 00:03:28.890 03/16/05 Sev=Warning/3 CM/0xA3100012
Unable to forward xAuth request data to xAuth application. Error code 4294967283
27 00:03:28.890 03/16/05 Sev=Warning/2 IKE/0xE3000099
Failed to process Xauth Request (NavigatorTM:412)
I know it's not a case where I'm entering in the wrong username or password and I've reinstalled the client.
Any ideas?
I think it has to do with the client failing to initiate or start the xauth process. But I'm not too familiar with this part.
aaa new-model
!
!
aaa authentication login userauthen local
aaa authorization network groupauthor local
crypto isakmp policy 3
encr 3des
authentication pre-share
group 2
!
crypto isakmp client configuration group ciscovpn
key 0 cisco123
pool ippool
acl 108
!
!
crypto ipsec transform-set myset esp-3des esp-sha-hmac
!
crypto dynamic-map dynmap 10
set transform-set myset
!
!
crypto map clientmap client authentication list userauthen
crypto map clientmap isakmp authorization list groupauthor
crypto map clientmap client configuration address respond
crypto map clientmap 10 ipsec-isakmp dynamic dynmap