VPN Client to PIX 515E Version 7.0

[m-wessendorf]

Hi,

I have a problem getting a VPN-Connection between a PIX515E and VPN-Client. The conf of the pix I attached. The tunnel comes up and the sa etc is ok. But I can't reach any internal host.

In the routetable of the PIX there is this entry:

S 0.0.0.0 0.0.0.0 [1/0] via 146.254.169.1, outside

C 10.52.0.0 255.255.255.0 is directly connected, inside

C 146.254.169.0 255.255.255.0 is directly connected, outside

S 172.16.1.1 255.255.255.255 [1/0] via 146.254.169.1, outside

Do you have any ideas?

Cheers,

Matthias

[konopkp77]

Hi,

I see that you did not apply any access-lists to crypto map. You should do this using command: crypto map (name of the map) match address (name of the ACL in your case VPN). This will tell what traffic will by put to vpn tunnel.