09-17-2012 01:41 PM
We have an ASA running 8.4(3).
When I try to connect with a VPN client, it does not work. When I look at the log, port 500 is being forwarded to some device on the network. There is nothing in the ASA config that references that address (192.168.1.159.)
What are some possible reasons the ASA might send the traffic to that device?
6 | Sep 17 2012 | 14:52:16 | 302016 | 74.x.x.x - My IP | 30827 | 192.168.1.159 | 500 | Teardown UDP connection 1902352 for outside:74.x.x.x/30827 to inside:192.168.1.159/500 duration 0:02:15 bytes 3472 |
Solved! Go to Solution.
09-17-2012 04:35 PM
Hello,
I would say you are hitting the following bug ID: CSCty16661
8.4(1)
8.4(3)
8.2(5.24
Just to make sure you are hitting the bug, are you using netflow???
Regards,
Julio
Any other question..Sure... Just remember to rate all the helpful posts
09-17-2012 02:15 PM
Hi,
Please attach "show xlate | inc 500" also, ASA version?
Thanks.
Portu.
09-17-2012 04:35 PM
Hello,
I would say you are hitting the following bug ID: CSCty16661
8.4(1)
8.4(3)
8.2(5.24
Just to make sure you are hitting the bug, are you using netflow???
Regards,
Julio
Any other question..Sure... Just remember to rate all the helpful posts
09-18-2012 10:08 AM
It looks like it was the bug. Thanks to both of you for the help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide