VPN CONFIGURATION

[ericohermoso]

Hi,

Please I am new about the VPN configuration. I have Cisco ASA 5520. How will I know that my Cisco will support VPN.?Is there any additional module  to be inserted ?

thank you and best regards

[JORGE RODRIGUEZ · Accepted solution]

It will support VPNs,  see table for your model , you do not need any  VPN modules  is all integrated . You can also see firewall eabled/disabled  features in output   show version   from firewall  command line .

Models

http://www.cisco.com/en/US/products/ps6120/prod_models_comparison.html

For VPN config exmaples RA or L2l etc..

http://www.cisco.com/en/US/products/ps6120/prod_configuration_examples_list.htmlhttp://www.cisco.com/en/US/partner/products/ps6120/prod_configuration_examples_list.html

I recomend  to see this video introduction of the product to get you started to get overall information of the firewall

http://www.cisco.com/en/US/products/ps6120/index.html

Regards

[ericohermoso]

Hello,

I got this info from sh version:

Licensed features for this platform:
Maximum Physical Interfaces  : Unlimited
Maximum VLANs                : 150      
Inside Hosts                 : Unlimited
Failover                     : Active/Active
VPN-DES                      : Enabled  
VPN-3DES-AES                 : Enabled  
Security Contexts            : 2        
GTP/GPRS                     : Disabled 
VPN Peers                    : 750      
WebVPN Peers                 : 2        
AnyConnect for Mobile        : Disabled 
AnyConnect for Linksys phone : Disabled 
Advanced Endpoint Assessment : Disabled 
UC Proxy Sessions            : 2   

VPN is enabled, what I do not know is WebVPN : 2. ?

Anyway thank you so much for the reply and all the site information.

[JORGE RODRIGUEZ]

Erico,  you're very welcome..   go over the links, it is alot so  take your time..   if any questions post them and someone in netpro will help.

The Webvpn 2, means that all ASA comes with 2  licensed Web VPN sessions, meaning if you want to use WEBvpn or Annyconnect  VPN you can only have 2 sessions established, if you need to increase the session then you need to purchase licenses for it, which I believe goes by bulks of  25,50,100  etc.. 

Regards