I want to make sure I am doing this correctly. What I would like to know is, should I brake down each server in SVR_GROUP-120 for the NAT or will it work with just this one line i have? I need the user to connect to each server and I need to connect to each of their servers with the IP of machine that the user is connected to.
object-group network SVR_GROUP-120
network-object host 10.120.13.64
network-object host 10.120.13.65
network-object host 10.120.13.96
network-object host 10.120.13.222
exit
!
object-group network 2052_VPN
group-object SVR_GROUP-120
exit
!
object-group network 2052_Company_5
description | 2052 VPN |
network-object host 10.11.222.11
network-object host 10.11.222.12
network-object 10.1.11.0 255.255.255.0
network-object 192.168.0.0 255.255.255.0
exit
access-list VPN_5051 extended permit ip object-group 2052_VPN object-group 2052_Company_5
! NO NAT OR DOUBLE NAT ACCESS
nat (INSIDE,OUTSIDE) source static 2052_VPN 2052_VPN destination static 2052_Company_5 2052_Company_5