vpn through 515 to 501 and use PC Anywhere

[matthew.bauer]

hey all,

this is what I have

vpn client 4.0.3 through a 515E to a 501. I want to get to a machine on the inside interface of the 501

I created two ACL's in the 515 to allow any on the inside interface to the public ip of the 501 for esp and isakmp.

With this done, I can connect and login to the 501, get a network address from that network. I want to establish a connection to a server on the inside of the network of the 501 using PC anywhere. Are there any other ports that need to be open beside data and status for PC anywhere. What sort of ACL's, translations, etc will I need to get the connection to work, and on which pix (515e or 501) will I have to make the changes to.

If I connect via a laptop and vpn client from a place other than behind the 515e, i can connect using PC anywhere.

Thanks for your time

Matt

[benhur.p]

Everything looks fine, any update on thsi ?

[matthew.bauer]

It does not work when I try to connect the remote machine through the 515e. There is a NAT or ACL or something that I am missing.

Thanks

Matt

[#4]

PCAnywhere requires tcp 5631 and udp 5632 as defaults.