cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2727
Views
0
Helpful
2
Replies
Highlighted
Beginner

VPN Tunnels Monitoring on ASA5510 with IOS 7.0 (Monitoring through Nagios Server)

VPN Tunnels Monitoring on ASA5510 with IOS 7.0 (Monitoring through Nagios Server).

Hi I want to use Nagios to monitor each of the S2S Tunnels built on ASA 5510. I can use the icmp on Nagios by adding Nagios host in IPSEC network of each tunnel but in that case the change needs to be done at other end of Tunnel as well.

Can someone suggest an option for above.

Thanks in advance.

Abhay

2 REPLIES 2
Highlighted
Beginner

Re: VPN Tunnels Monitoring on ASA5510 with IOS 7.0 (Monitoring t

Try this:

http://www.appliedtrust.com/blog/2009/08/monitoring-site-site-vpns-cisco-asa

I used the value with snmpwalk and found the connection for site to site and anyconnect.

Highlighted
Beginner

Re: VPN Tunnels Monitoring on ASA5510 with IOS 7.0 (Monitoring t

Thanks for your response, I am not at work for next few days, will try this once back to work and will share the results