!!warning: no traffic is selected

[manuscript1]

HI

still having fun with my VPN - tunnel is up but I suspect used aggressive mode and have this entry in crypto map on the ADSM (see attachment )

Have an ikev1 tunnel to a 5505 using easy vpn ( tunnel is up )

the adsm has the following config

group-policy EASYVPN internal

group-policy EASYVPN attributes

 vpn-tunnel-group l2tp-ipdec-ikev1

 split-tunnel-all-dns disable

  new enable

tunnel -group TEST type remote-access

tunnel-group-policy EASYVPNpolicy

tunnel-group TEST IPsec-attributes

 ikev1 pre-share ****

 crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ( all transform sets follow for now )

 crypto map CRYPTOMAP 65535 IPsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP

the is was all added with adsm

I can see the Crypto-map editor in adsm and the error as per attachment - thing is what do I change - as this is easy VPN surely it needs to be dynamic ?  is there another filter needs applying ( lets assume my source is 10.10.0.0 and my destination is any ....

any help be good !

[mickyq]

Hi

Try defining interesting traffic that you want to traverse the vpn tunnel.

I dont use ASDM but looking at it, edit the crypto map. Select the Traffic Selection and configure source 10.10.0.0, destination any and the service port.