04-24-2002 05:37 AM - edited 02-21-2020 11:42 AM
I need to implement a Win2k VPN Server behind a PIX506 firewall, if possible. I think I need to, and have, mapped a static ip route to the RRAS server, giving it an outside address. I have tried adding "fixup protocol" lines to the PIX config for pptp 1723, tcp 1723 and ip 47, but it's not working (keeps saying bad protocol). I'm doing this, not because I know what I'm doing, but because it seems the thing to do after research and looking at the PIX config (maybe not). Maybe this particular traffic just won't go through this particular firewall; Does anyone know?
Also, after I get hole punched in the firewall, I don't have a clue how to set up the VPN clients. If you can help with that also, I would be eternally in your debt.
Thanks!
04-25-2002 07:25 AM
I think you should implement your VPN on the PIX. Cisco VPN clients will work only on Cisco VPN supported device like the PIX you have.
04-26-2002 06:28 AM
the 47 is a protocol not an ip port
access-list 101 permit 47 any any or conduit permit 47
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide