Hello,
I've bought a 3g card from Cisco for testing and I'm having problems connecting the card to the 3g network. I've configured the card as I found on the cisco website. When I try to send data over the cell link the card makes the call to the BSS(the call is succesfull as I can see from show dialer) but the card doesn't get IP from provider. I've checked the card with another 3g modem and it is ok. Here is the config from the router:
chat-script gsm "" "*99#" TIMEOUT 60
interface Loopback0
ip address 192.168.0.1 255.255.255.0
!
interface FastEthernet0/0
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet0/1
ip address 192.168.1.1 255.255.255.0
ip virtual-reassembly
duplex auto
speed auto
!
interface Cellular0/1/0
ip address negotiated
ip access-group 100 out
ip virtual-reassembly
encapsulation ppp
dialer in-band
dialer string gsm
dialer-group 1
async mode interactive
ppp chap hostname zvodafonero
ppp chap password 0 vodafone
ip route 0.0.0.0 0.0.0.0 Cellular0/1/0
access-list 100 permit icmp any any log
access-list 100 permit ip any any log
line 0/1/0
exec-timeout 0 0
script dialer gsm
modem InOut
no exec
Router#sh cell 0/1/0 prof
Profile 1 = INACTIVE*
--------
PDP Type = IPv4
Access Point Name (APN) = zvodafonero
Authentication = CHAP
Username: zvodafonero, Password: vodafone
* - Default profile
Router#
Router#sh cell 0/1/0 net
Current Service Status = Normal, Service Error = None
Current Service = Combined
Packet Service = HSDPA (Attached)
Packet Session Status = Inactive
Current Roaming Status = Home
Network Selection Mode = Automatic
Country = ROU, Network = CONNEX
Mobile Country Code (MCC) = 226
Mobile Network Code (MNC) = 1
Location Area Code (LAC) = 32022
Routing Area Code (RAC) = 1
Cell ID = 35558
Primary Scrambling Code = 3
PLMN Selection = Automatic
Registered PLMN = CONNEX GSM , Abbreviated = CONNEX
Service Provider =
Router#
I've enabled some logs:
*Jun 20 11:14:34.503: CHAT0/1/0: process started
*Jun 20 11:14:34.503: CHAT0/1/0: Asserting DTR
*Jun 20 11:14:34.503: CHAT0/1/0: Chat script gsm started
*Jun 20 11:14:34.503: CHAT0/1/0: Sending string: *99#
*Jun 20 11:14:34.503: CHAT0/1/0: Chat script gsm finished, status = Success
*Jun 20 11:14:34.635: TTY0/1/0: no timer type 1 to destroy
*Jun 20 11:14:34.635: TTY0/1/0: no timer type 0 to destroy
*Jun 20 11:14:34.635: TTY0/1/0: no timer type 2 to destroy
*Jun 20 11:14:36.635: %LINK-3-UPDOWN: Interface Cellular0/1/0, changed state to
up
*Jun 20 11:14:36.635: Ce0/1/0 PPP: Using dialer call direction
*Jun 20 11:14:36.635: Ce0/1/0 PPP: Treating connection as a callout
*Jun 20 11:14:36.635: Ce0/1/0 PPP: Session handle[5D00010C] Session id[90]
*Jun 20 11:14:36.635: Ce0/1/0 PPP: Phase is ESTABLISHING, Active Open
*Jun 20 11:14:36.635: Ce0/1/0 PPP: Authorization required
*Jun 20 11:14:36.635: Ce0/1/0 LCP: O CONFREQ [Closed] id 123 len 25
*Jun 20 11:14:36.635: Ce0/1/0 LCP: ACCM 0x000A0000 (0x0206000A0000)
*Jun 20 11:14:36.635: Ce0/1/0 LCP: AuthProto CHAP (0x0305C22305)
*Jun 20 11:14:36.635: Ce0/1/0 LCP: MagicNumber 0x13A77899 (0x050613A77899)
*Jun 20 11:14:36.635: Ce0/1/0 LCP: PFC (0x0702)
*Jun 20 11:14:36.635: Ce0/1/0 LCP: ACFC (0x0802)
*Jun 20 11:14:38.623: Ce0/1/0 LCP: Timeout: State REQsent
*Jun 20 11:14:38.623: Ce0/1/0 LCP: O CONFREQ [REQsent] id 124 len 25
*Jun 20 11:14:38.623: Ce0/1/0 LCP: ACCM 0x000A0000 (0x0206000A0000)
*Jun 20 11:14:38.623: Ce0/1/0 LCP: AuthProto CHAP (0x0305C22305)
*Jun 20 11:14:38.623: Ce0/1/0 LCP: MagicNumber 0x13A77899 (0x050613A77899)
*Jun 20 11:14:38.623: Ce0/1/0 LCP: PFC (0x0702)
*Jun 20 11:14:38.623: Ce0/1/0 LCP: ACFC (0x0802)
*Jun 20 11:14:40.639: Ce0/1/0 LCP: Timeout: State REQsent
*Jun 20 11:14:40.639: Ce0/1/0 LCP: O CONFREQ [REQsent] id 125 len 25
*Jun 20 11:14:40.639: Ce0/1/0 LCP: ACCM 0x000A0000 (0x0206000A0000)
*Jun 20 11:14:40.639: Ce0/1/0 LCP: AuthProto CHAP (0x0305C22305)
*
Thank you,
Marian
