11-08-2018 01:58 AM
Hello,
We have a problem on WSA IronPort S370. the led on the front panel stays on and a message is displayed :
PCIE Fatal Error On bus 0 Device 1. Review & Clean Sel
Is there a solution to solve this problem or a RMA is necessary ?
Thank you
Solved! Go to Solution.
11-08-2018 08:45 AM
RMA is good, raise an TAC case to replace, worth reboot and see any luck.
But suggest for RMA.
11-08-2018 08:45 AM
RMA is good, raise an TAC case to replace, worth reboot and see any luck.
But suggest for RMA.
11-20-2018 05:32 PM
Hi,
You can perform below activity to resolve the issue:
Power down the WSA and reseat the pci-e cards and then power back up.
If you still see the fatal error after performing above step we will have to set up RMA.
Rgds,
Gagan
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: