SNMP and WSA

[spacemeb]

Hello,

According to the documentation, I enabled snmp traps with snmpconfig.

I also found some OIDs which can be helpful for polling. 

• Client Requests / Second
  
  • cacheThruputNow (.1.3.6.1.4.1.15497.1.2.3.7.1.1)
  • Request throughput in the last minute
• Response Time
  
  • cacheTotalRespTimeNow (.1.3.6.1.4.1.15497.1.2.3.7.9.1)
  • Cache total response time in the last minute
• CPU Usage
  
  • cacheBusyCpuUsage  (.1.3.6.1.4.1.15497.1.2.3.1.5)
  • Percentage busy time of the CPU

Is there anything else that I should be aware? 

Where should I find a full list with OIDs for WSA? 

Thanks in advance!

[amojarra]

Hi  @spacemeb 

Here is the list of all MIBs for WSA : https://www.cisco.com/web/ironport/tools/web/10.1.2/asyncosweb-mib.txt

You can find the parent link here if you need this for SMA and ESA : 

Cisco Secure Web Appliance - Cisco

Regards,

Amirhossein Mojarrad

+++++++++++++++++++++++++++++++++++++++++++++++++++

++++   If you find this answer helpful, please rate it as such  ++++

+++++++++++++++++++++++++++++++++++++++++++++++++++

[spacemeb]

Hello again,

Do we have specific OIDs/sequence of numbers? I would like a full list of it.

[Ken Stieers · Accepted solution]

The MIB files are the whole list of what's available via SNMP

You may need to find a mib browser to help you make sense of it.

Heres a link to a bunch of free ones.
https://www.easysnmp.com/tools/snmp-browsers/

[balaji.bandi]

As per i know there is a limited OID to monitor using SNMP WSA.

as you are already visited the page :

https://www.cisco.com/c/en/us/support/docs/security/web-security-appliance/118421-technote-wsa-00.html

download MIB as suggested and do snmpwalk to get more informaton.

[spacemeb]

Hello,

So the monitoring occurs from the traps that are configured to be sent.

Also, we have the limited OIDs that you told me, right?

OK, understood!

[balaji.bandi · Accepted solution]

yes thats correct. hope that help you. (unlike other devices we have only limited here)