10-12-2023 06:53 PM
Hello All,
I need to confirm that If we will integrate Cisco WSA with TG (ThreatGrid) then for the communication what all port numbers do we need to allow in the firewall?
In TG & WSA integration, we're going to integrate it with WSA p1 interface to TG Clean interface.
Same I need to confirm for SMA & WSA as well, If I integrate Cisco SMA with WSA then which port number needs to be open for communication?
@amojarra @websecurity
Solved! Go to Solution.
10-13-2023 02:35 AM
On-prem uses port 443, same for the public cloud.
please allow me to share this link, that might come in handy:
Regards,
Amirhossein Mojarrad
+++++++++++++++++++++++++++++++++++++++++++++++++++
++++ If you find this answer helpful, please rate it as such ++++
+++++++++++++++++++++++++++++++++++++++++++++++++++
10-13-2023 12:21 AM
If this cloud, then port 80 and 443 is good enough to reach cloud.
SMA to WSA port 22 is good enough.
Make sure you use Right Interface (P1) most cases P1 is used internally.
10-13-2023 12:25 AM
Hello Balaji,
We have on-prem TG not in cloud. For on-prem TG as well, I believe we need to open 443 port number right?
10-13-2023 01:22 AM
yes if that not in the same VLAN.
10-13-2023 02:43 AM
Not in the same VLAN means WSA p1 interface subnet should be different from TG Clean interface subnet?
10-13-2023 02:35 AM
On-prem uses port 443, same for the public cloud.
please allow me to share this link, that might come in handy:
Regards,
Amirhossein Mojarrad
+++++++++++++++++++++++++++++++++++++++++++++++++++
++++ If you find this answer helpful, please rate it as such ++++
+++++++++++++++++++++++++++++++++++++++++++++++++++
10-13-2023 02:47 AM
I need to integrate TG from its clean interface with the WSA P1 interface. If the both interface will be on same subnet then I don't think that it will create issue. Please confirm?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide