10-10-2018 02:21 PM
We are planning an upgrade on a couple of WSAs running version 10.5.2-072 and the idea is to get to version 11.5.1-115. The release notes mentions that we can go directly to the newer version but I would like to know if there is a guide with the required steps, roll back actions and consideration when having WCCP redirecting traffic to both WSAs. I should be able to upgrade one while the other one takes care of the Web traffic, right?
I am just trying to minimize the risk.
Thanks
10-10-2018 11:40 PM
Upgrade path mention below document :
10.5.2-072 --> 11.0.x --> 11.5.x
https://www.cisco.com/c/dam/en/us/td/docs/security/wsa/wsa11-5/WSA_11-5-1_Release_Notes.pdf
Since you have 2 WSA in network, it is easy for you to upgrade.
1. remove WCCP configuration for the WSA 1 which you decided to upgrade.
2. Make sure you have all the backup without masking.
3. make sure WSA have internet connection
4. Make sure you read the release notes before upgrading and understand any caveats.
5. above URL have steps to upgrade.
6. Once upgrade successfully bring back WSA to Live environment, do some failovers to new WSA. make sure all working as expected. before you upgrade other one. leave for couple of days working - before you upgrade other one.
7. all working as expected, then move to WSA 2 upgrade as same procedure.
10-11-2018 11:36 AM
Thanks for the reply.
Based on the release notes it seems that I can upgrade directly to version 11.5.x
When you say: "remove WCCP configuration for the WSA 1 which you decided to upgrade.", do you mean disable redirection on the GUI of via CLI? What command do I need?
10-11-2018 11:47 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide