cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
180
Views
0
Helpful
0
Replies
Highlighted

Per-User Bandwidth Contracts from ISE

Hi,

Trying to apply Per-User Bandwidth Contract from ISE on a WLAN based on if the client has a valid certificate or not.

If I configure Per-User Bandwidth Contract direcly on the hole WLAN in the WLC the clients that connect get restricted BW in both direction but if I apply the bandwidth limitations with Cisco ISE the client is only getting resticted downstream and not upstream.

 

If I run a "show client detail <MAC>" (see below) everything looks OK but in reality there is no upsteam limit.

 

Avg data Rate.................................... 1136
Burst data Rate.................................. 5680
Avg Real time data Rate.......................... 1136
Burst Real Time data Rate........................ 5680
Avg Uplink data Rate............................. 1136
Burst Uplink data Rate........................... 5680
Avg Uplink Real time data Rate................... 1136
Burst Uplink Real Time data Rate................. 5680
 
We are running 3504 WLC version 8.5.151.0 with 2802i APs.
ISE is version 2.4 patch 7
CreatePlease to create content
Content for Community-Ad

August's Community Spotlight Awards