
- Subscribe to RSS Feed
- Mark as New
- Mark as Read
- Bookmark
- Subscribe
- Printer Friendly Page
- Report Inappropriate Content
After doing some research on the web. I couldn't find perfect setup method but Here you guys I noted down and pasting it here. I hope it will help.
CUCM> On CUCM Copy another phone Cisco 8821
or
Create new: Phone type Cisco 8821 and hit next
MAC Address
Phone Button Template
Device Pool
Location
Owner User ID
SIP Profile
Device Security Profile
Make sure you pick Cisco 8821 - Standard SIP for security profile and Standard SIP profile for SIP profile.
save and apply config.
top left Association (Modify Button ITems)
Hit on Line [1] Add a new DN
Directory number information
give any number - 2153
description -
add the associated devices
and call pick up group where it is going to be use.
Save and apple config.
Cisco Phone 8821> open settings
Wifi
Pick Profile 1
Network Config
IPV4
DHCP off
Add manually configuration
IP add, Subnet mask, Default router, DNS server 1, DNS server2 and TFTP server1. add this information and hit three dots and save.
Wlan Configuration
SSID
Security mode
802.11 mode
On call power
Pick PSK for organization wireless phone network and add the password and leave 802.11 and call power save enable.
Save this and restart your phone. Test incoming and outgoing calls.
In case any questions, feel free to ask or if liked this leave likes. :)
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.