March 31 2015. Version 3.6.5
Enhancements
- Tool tips added on AP grid
- AP MIC expiration warning
- Flex Policies information on WLAN table
Fixes
- Minor parsing errors
- Wrong text message on 100003
- Wrong error on missing information on WLANS for custom web profiles
February 04, 2015. Version 3.6.4
Fixes
- Typos on messages
- RF health exception if neighbor AP had no power level
- Incorrect calculation of side channel interference could lead to zero health
- Incorrect parsing of mobility peers when new mobility is enabled
- No text for message 2005
- WLAN data rates nor parsed properly, display error
- Message tab columns had incorrect order
NGWC:
- Parsing error on coverage information line
- Parsing error on peer to peer wlan state
- Corrected WLAN table display
- Parsing of AP groups
January 15, 2015. Version 3.6.3
Fixes
- 11b channel monitor incorrectly parsed, leading to false positive report
- 11b RF group peers not properly tracked
- Corrected text for messages 40043, 30062 for clarity
- Fixed false detection of telnet enabled on WLC
- Added detection for parsing error on DCA Monitor channel line
- Fixed password length check (120013)
December 17, 2014. Version 3.6.1
Enhancements
- IOS-XE improved support: best practices, mobility parsing, GUI display. Partial support for RF summary, 3.7 RF information
- Serial number in AP summary table
- Filter per band in AP RF summary table
- On Channel Neighbors count in AP RF summary
Fixes
- Power distribution graph level 1 not displayed
- Exception while parsing 5760
- RF Health calculation for Side channel noise in 5 Band
- RF problem finder window scale issues on VMWare
- High SNR client stats missing
November 20, 2014. Version 3.5.3
Fixes
October 10, 2014. Version 3.5.2
Fixes
- Detecting Empty mesh BGN in AP config
- Incorrect reporting of standalone TKIP in use, when there is no dot1x or PSK policies set
- Corrected warning for empty IP Address on redundancy interfaces
- Message wmm required for 11ac/11n not displayed when parsing a single wlc
- Exception on 7.3 configs without RF profiles
- Improved error reporting on parsing lines
- Incorrect parsing of flex AP mode
- Partial fix for window size problem on rf problem finder tool. Disable Aero interface in Windows if still having problems.
- Handles gracefully AP list corruptions (adds AP creation in AP group information)
- Properly parses Channel 14 Interference/Noise data as NA, in ETSI APs
- Fix on Nearby list processing, if last line in AP is corrupted
- Fix on parsing of system info\Management IP address
- Fixed logic of message 30062 (false positive)
- Fixed duplication of message 30057 for some scenarios
- Fixed parsing of Static WEP state
- Null error on best practices checks for some configs
- Fixed parsing error on incorrect line separator
- Fixed error on percentage display on best practices summary
Enhancements
- 43 new checks
- Best Practices score analysis
- Flexgroup and FlexAP support
- Displays DHCP proxy per interface, compares across controllers
- Parsing, comparison between WLCs, and display of global user idle timeout
- Parsing, comparison between WLCs, and display of WiFi direct, wlan sleep timer/sleeping client feature
- Config Comparison across controllers of DCA mode, selection interval, metric contributors, channel list, and channel width across controllers
- Config Comparison across controllers of TPC mode, power threshold
- Mesh security mode parsing, comparison across controllers
- Displays DCA metric contributions
- New Security Checks category
- WLAN parsing of 11r, SKC, PMF, comparison across controllers
- Parsing, comparison between WLCs, and display of critical management password policies
- WLAN table rewrote for simplification on information displayed, less columns, adds support for 11r, PMF
- Show values to the RXSOP and CA info messages
- AP power state and flex group name to AP config table
- New AP group CSV export
- 8.0 Support. Added RF profile DCA bandwidth, Fixed Parsing error on QinQ AP group info
July 19, 2014. Version 3.4.2
Enhancements
- New Best Practices analysis tool. Focused on checking if "good to use" features are in place
- WPS section parsing
- SSH/Telnet/Fast SSID parsing and display
- Checks for telnet enabled, DHCP proxy mismatch, NTP sync, Management over Wireless added
- Improved readability of WLC/Site summary pages
- Added QoS, Local profiling, dot1x info to wlan table
- New Report Center, to launch all supported report files. Disabled default report creation
Fixes
- Significant speed improvements for Neighbor calculation on large networks
- Radius server line parsing error if line was incomplete
- RF Index calculation exception on some files
June 27, 2014. Version 3.3.1
Enhancements
- Added message summary per WLC/Site
- HTML report ad CSV file generation is now disabled by default
- New Report Center being added (work in progress)
Fixes
- Correct library installation for Chart component on some PCs
- Moved to .Net 3.5 client profile for lower memory/startup time
- Exception error on RF Health calculation when unknown nearby data was found
- Fixed RF Health metric for side channel noise/interference
June 27, 2014. Version 3.3.0
Enhancements
- Added warning if TKIP standalone is used
- WLAN table enhancements: displays encryption types, AVC
- AP graph can be filtered by AP group
- Improved message 60011 with compensated power data
- New RF Health metric for ease of detection of problematic areas
Fixes
- Corrects parsing of 4.2 WLC files
- Reduces problem on .Net library load (lower time when opening config set for first time)
- Fixes problem on AP manager check with vlan untagged scenario
- Fixes problem on redundancy parameter parsing
- Fixes logic of message 30065
April 23, 2014. Version 3.2.4
Enhancements
- Added partial support for 5760/3850 NGWC controllers. You need to collect "sh tech and sh tech wireless" on same file for each controller (one file per ngwlc)
- Added parsing and display of wlan count per radio on AP config
- Updated warning for controllers with deferred or affected by security advisory versions
- Parses, checks and displays Local EAP status per WLAN
- Parses, checks and displays Rogue Policies, compares settings between controllers
- Parses, checks and displays Clean Air config, compares settings between controllers
- Chart for Client SNR distribution
- Best practices 2.0 Checks
- Recommend to disable 1,2,5.5,11 data rates
- Warn if more than 4 SSIDs active per radio
- Recommend multicast multicast mode for all cases
- Warn if mobility group (same name) > 15 controllers, shows message to reflect that it should cover only the RF roaming space
- Recommend low radius timeout depending on usage scenario (not a general change)
- Warn if EAP identity if <10 sec, and when is needed
- Warn if using internal DHCP server due to scalability issues
- Warn if using local EAP, due to scalability on very large networks
- Recommend to change EAP retries to 4, timeout to 400ms
- Warn if tacacs timeout is short, recommend long times for OTP
- Recommend to have minimum rogue RSSI to -80
- Recommend to disable all rogue auto contain settings, unless absolutely needed for security reasons
- Recommend AVC enabled
- Warn if Fast SSID is not enabled for Apple Clients
- Warn if cleanair is not enabled
Fixes
- Parsing of Tacacs server entries with management timeout values
- Parsing of User Idle timeout per wlan when it is disabled
- Wrong detection of AP on high co-channel
- Corrected redistribution of MS Chart Control (now properly included, and prerequisite)
March 21, 2014. Version 3.1.1
Fixes
- Application error when clicking AP name. Slot0 was not parsed
- Multicast address message only displayed if multicast is enabled (30034)
- RSSI client count calculation error for RF Summary
March 20, 2014. Version 3.1.0
Features
- Adds support for 7.4 to 7.6 versions
- RLAN support
- Displays Redundancy info for 7.6
- Almost full parsing of WLAN configuration
- Displays AP username in AP list
- Parses and displays 802.11n, 802.11ac network status
- Changes how text information is displayed, for ease of reading
- Added Radius Auth Call Station ID support
New Checks
- Warns if 11ac or 11n radios are present, but WMM is disabled on the WLAN
- Warns if 11ac or 11n radios are present, but 11n or 11ac support is disabled on the controller
- Compares Radius Auth Call station ID across controllers
- 78 parameters compared for matching WLANs across WLCs.
- Warns if using HA, and no vlan tagging on management interface
Fixes
- Error while parsing mobility peers
- Corrected that RSSI/SNR client percentage on RF summary per controller, are calculated for 1 controller, and not for all loaded
- Corrected High RSSI client count per controller
- Fixed wrong info on Radius aggressive failover status
- Parsing of Radius servers on new versions
- Parsing error on Mobility peers
- See more at: https://supportforums.cisco.com/document/7711/wlc-config-analyzer#sthash.vaRBw5Sn.dpuf